Zum Inhalt springen
Zur Hauptnavigation
Zur Servicenavigation

Moisture Measuring in Process Systems


Hand-held equipment for mobile measurement

To 1. Hand-held for portable measurement

For quick moisture measurement during goods receipt inspection, or in storage.

Measuring instruments: MW 1100


For contactless humidity measurement

To 2. Transmission measuring device MW-T

For contactless humidity measurement in bales or cartons at the incoming goods inspection.

Measuring instruments: MW-T


Sensor installation in the Silo hopper

To 3. Sensor installation in the Silo hopper

Online measurement: Directly in the exhaust hopper or over a bypass.

Measuring instruments: MW 4200, MW 4260 or MW 4270 with planar sensor or MW 4260 or MW 4270 with bypass.


Sensorinstallation im Silotrichter

To 4. Sensor installation at ejection location

Sensor installation at the drop-off point at the end of a conveyor.

Measuring instruments:MW 4200, MW 4260 or MW 4270 with planar sensor.


Laboratory sensors for measurement on samples

To 5. Laboratory sensors for measurement on samples

For quality control and for ensuring quality, for product development or goods receipt inspection.

Measuring instruments: MW 1150 – For routine measurements, MW 4300 / MW 4310 for sophisticated laboratory applications


Vibrating conveyor channel

To 6. Vibrating conveyor system

Installation of the planar sensor directly in a vibrating conveyor.
 
Measuring instruments:  MW 4260 or MW 4270 with planar sensor and special cable set.


Sensor installation in the sliding block

To 7. Sensor installation in the sliding block

Installation of the planar sensor above the product stream before the swaging, or granulating, of material on conveyor belts.

Measuring instruments: MW 4200, MW 4260 or MW 4270 with planar sensor


For contactless humidity measurement in bales or cartons at the quality inspection

To 8. Transmission measuring device MW-T

For contactless humidity measurement in bales or cartons at the quality inspection.

Measuring instruments: MW-T


Sensor installation in the wall on the buffer silo

To 9. Sensor installation in the wall on the buffer silo

Installation of the planar sensor between two conveyor belts, or vibrating conveyors.  

Measuring instruments: MW 4200, MW 4260 or MW 4270 with planar sensor

Typical Measuring Points

Measuring point 1

Quality control at goods receiving point

Measuring point 2

Measuring for apportionment control

Measuring point 2

Measuring for apportionment control

Measuring point 4

Sensor installation at ejection location

Measuring point 5

In-process quality assurance

Measuring point 6

Assurance of product properties

Measuring point 7

Continuous measuring for dryer control

Measuring point 8

Quality inspection at the point of outgoing goods

Measuring point 9

Quality control of finished product

© 2018 TEWS Elektronik.
Up